AL – SERIES
DUCTED AXIAL FAN
- V = 100 ÷ 140000 [m3/h]
- Ps = 10 ÷ 1000 [Pa]
The AM and Al series fans are suitable for duct applications with low and medium pressure, high clean or slightly dusty air flow rates in the range of temperature −20˚C to +55˚C, special versions can exceed these limits.
Download PDF
The industrial applications are different, including food, naval, heat exchange, refrigeration, ventilation, drying, oil & gas, petrochemical, molasses;
Shape of the conveyor can be optimized to improve aerodynamic efficiency and noise through inlet cone.
The conveyors AM series short and long Al series, made of carbon steel with appropriate thickness and welded motor support, are protected by RAl 7032 epoxy paint and C3m environmental corrosion class according to ISO t2944.
The conveyors AM series short and long Al series, made of carbon steel with appropriate thickness and welded motor support, are protected by RAl 7032 epoxy paint and C3m environmental corrosion class according to ISO t2944.
The impellers, made of die−cast aluminum alloy hubs and airfoil blades in polypropylene reinforced glass (PPG) or glass nylon (PAG), are balanced with G−degree 6.3 according to ISO t940 and have fixed or variable pitch angle (Jrom diameter 700 [mm]). The electric motors, in direct coupling, are asynchronous three-phase or single-phase 2/4/6/8 poles in B3 construction and in continuous duty S1 according to UNEL-MEC and IEC standards.
Contact us for a quote or for technical support on the selection of your industrial fan
