VB – SERIES
LOW PRESSURE CENTRIFUGAL FAN
- V = 200 ÷ 25000 [m3/h]
- Pt = 270 ÷ 1500 [Pa]
VB series fans are used for on-machine applications requiring low pressures.
Download PDF
They are suitable for suction of fumes or exhalations and in general for all applications where it is necessary to move clean or slightly dusty air through suction or delivery ducts.
The screw conveyor is made of sheet steel with edged and welded profile, provided with a fixing flange on the delivery side, with holes allowing an orientation of 45 degrees, and with a mouthpiece on the suction side; the motor-holding disk allows reversible assembly.
The impeller with forward curved blades is made of carbon steel welded and balanced both statically and dynamically in direct coupling with asynchronous three-phase or single-phase motors 2/4/6 poles in construction form B5 or B3 and in continuous service S1 according to UNEL-MEC and IEC standards.
The temperature may not exceed 80°C.This limit may be exceeded only in special execution.
The screw conveyor is made of sheet steel with edged and welded profile, provided with a fixing flange on the delivery side, with holes allowing an orientation of 45 degrees, and with a mouthpiece on the suction side; the motor-holding disk allows reversible assembly.
The impeller with forward curved blades is made of carbon steel welded and balanced both statically and dynamically in direct coupling with asynchronous three-phase or single-phase motors 2/4/6 poles in construction form B5 or B3 and in continuous service S1 according to UNEL-MEC and IEC standards.
The temperature may not exceed 80°C.This limit may be exceeded only in special execution.
Contact us for a quote or for technical support on the selection of your industrial fan
